The SNMP agent provided with this product is based upon MIB-2 defined by RFC1213. For private MIB informa-
tion, refer to file "Mibinfo/XUPjNet.mib" in the CD-ROM.
SNMP setting
This product provides a SNMP (Simple Network Management Protocol) agent function.
The SNMP consists of a manager and agents. The group which exchanges information
with SNMP is called "Community". There are two access modes in a community, Refer
(read only) and Set (read- write). This product allows to use Refer (read only) only. The SNMP message
informs the projector status called "Trap" to an administrator. Click SNMP Setting on the main menu and
set up each item.
Item Description
Contact .....................Enter user name of the projector etc. (optional)
Place...........................Enter place of the projector (optional)
Community
name(refer).............Enter community name (read only). Default name is
"public".
PJ information
SNMP setting
To Next Page
Loading...
