Sanyo PLC-WXU30 - Preparation for Using the Moderator Function

104
Chapter 8 Network capture functions
Preparation for using the moderator function
First, follow the procedure in “2. Setup Procedure”  “Step 1–3” (p.16) and confirm that the setting status
is set as written below.
•Network Capture 4 is installed on the moderator's computer and each client’s computer and each
computer image can be projected.
Following application window appears when the Network Capture starts. After clicking Moderator reg-
istration button, the application window changes to "Moderator mode" window as shown in the lower
picture below.
Projector list Status of use
Join moderator's
group
Normal mode application window
Client listProjector list
Status of
use
Delete moderator's registration
Start real time
capture
Terminate capture
One-shot
Moderator mode application window
Moderator
registration
Parameter
setting
User