Installing the software
It is required to install the software into your computer to use the Network Capture function . Please
install the software as follows.
Note: To install the software into the computer with Windows 2000, Windows XP or
Windows Vista, you should logon as administrator. Before installation, make sure that
the other applications are closed, otherwise proper installation cannot be made.
Network Viewer & Capture 4 installation
1 Set the supplied Network Viewer & Capture 4 CD-ROM into the CD-ROM drive of your computer.
Double click SetupTool.exe icon in the "Tool" folder in the CD-ROM.
2 Select "English [United States]" from the pull-down menu on the "Choose Setup Language" window
and click OK button to start installing and then follow the installation wizards.
Installing the software
To Next Page
Loading...
