Sanyo PLC-WXU30 - Stopping Monitoring the Target; Displaying All the Status Information of the Target

14
Chapter 3 Basic Operation
Displaying all the status information of the target
Select a target and click button on the tool bar. The following status window appears
and displays all the available status information of the target.
 The target name and item which have an
abnormality or connection error happen-
ing are indicated with red.
 When PJ Network Manager cannot
acquire the value of column information,
"---" is displayed.
Stopping monitoring the target
To stop monitoring the target, click button again on the tool bar.
 The above procedure can perform by selecting Target display from Display menu.