Select "Network" as input mode previously.
1 Access to the control page of the projector by using the web
browser. From the Network menu, click Capture tab to display
the setting page.
2 Select the computer number from the pull-down menu button
of "Connecting PC" and click Start button. The screen image of
the selected computer will appear on the projected screen in real
time.
• To stop capturing, click One-shot button. The captured image
of the computer on the screen is frozen.
• To restart capturing, click Start button.
3 To end capturing, click End button.
The IP address of the connecting PC should be registered previously ( p.89).
If the error message appears, check item "Parameter set up" ( p.88).
To use the capture function from the web browser or projector, the Network Capture 4 on the captured
computer must be activated.
PC4PC3 PC6
Capture
PC5
PC2PC1
* PC provides the Network Capture.
Project a screen
image of PC1 with
PJ 2.
PJ2
PJ1
* Start capturing of
the PC1 from the
PC5.
[2] Control by the web browser
Set "On" when
using the wireless
mouse function
Using the real time capture
Item Description
Interrupt connection...............Set enable or disable the real time capturing connec-
tion from other computers during executing the real
time capturing operation.
To Next Page
Loading...
