- 1 -
LCD PROJECTOR Model No. PLC-XF70/XF71/XF1000 and PLV-WF20
LENS REPLACEMENT AND INSTALLATION PROCEDURE
Be sure to consult with a qualified service personnel.
When installing or replacing the Projection
Lens, refer to this manual. For installation
of the lens, use the parts specified in this
manual.
Do not use the installation manual and
Light-Block Plates in the optional lens
package.
Check the following parts supplied to this
projector.
LENS INSTALLATION PRECAUTIONS
L
Lens installation and replacement should be made by a qualified service personnel.
L
Be sure to install the lens by following this procedure precisely.
L
Do not touch or remove any parts except the lens and related parts. It may result in
malfunctions, electrical shock, fire hazard or other accidents.
L
Before installing or replacing the lens, check that the Part No. of the Projection Lens
matches to the projector.
L
When moving or setting up the projector, be sure to replace the Lens Cover to protect
the surface. And be careful not to hold or subject the lens to strong forces. Otherwise
the lens, cabinet, or mechanical parts may damage.
L
For details of the lens and installation, contact the sales dealer where you purchased
the projector.
The lenses listed below are designed for use with the PLC-XF70/XF71/
XF1000 and PLV-WF20 (when applicable).
AVAILABLE LENS
Part No. Type Zoom Focus
Projector Model No.
PLC-XF70/XF71/XF1000
PLV-WF20
LNS-W01
LNS-W01Z
Wide Fixed Lens Fixed Manual OK OK
LNS-W02
LNS-W02Z
Wide Zoom Lens Motor Driven Motor Driven OK OK
LNS-W03 On-Axis Wide Fixed Lens Fixed Manual OK OK
LNS-W04 Wide Zoom Lens Motor Driven Motor Driven OK OK
LNS-W05 Wide Zoom Lens Motor Driven Motor Driven N/A OK
LNS-W06 Wide Zoom Lens Motor Driven Motor Driven OK OK
LNS-W07 On-Axis Wide Fixed Lens Fixed Manual N/A OK
LNS-S01A
Standard Zoom Lens I Motor Driven Motor Driven OK OK
LNS-S02Z Standard Zoom Lens II Motor Driven Motor Driven OK OK
LNS-S03 Standard Zoom Lens III Motor Driven Motor Driven OK OK
LNS-M01
LNS-M01Z
Semi-Long Zoom Lens Motor Driven Motor Driven OK OK
LNS-T02 Long Zoom Lens Motor Driven Motor Driven OK OK
LNS-T03 Ultra-Long Zoom Lens Manual Manual OK OK
DO NOT USE THE OPTIONAL LENS BELOW FOR PLC-XF70/XF71/XF1000 AND PLV-WF20. OTHERWISE
DAMAGES MAY RESULT. LENS PART NO. : LNS-T01, LNS-T01Z
3 types of Light -Block Plates
2 types of Lens Attachments
3 types of Spacers
2 types of Safety Clamps
- 2 -
The installation procedure and needed parts for lens installation varies on Optional Lens. Check the Part No. of the
Optional Lens and be sure to install or replace the lens by following the procedure below.
3
Turn the Lens Mount Cover counter-clockwise
and take it off by pulling forward. (See Fig. 3)
LENS REPLACEMENT AND INSTALLATION PROCEDURE
Fig. 3
Lens Mount Cover
A
Fig. 4
B
A
B
4
Remove 2 Screws A and loosen 2 Screws B.
Slide the Top Cover forward to take off. (See
Fig. 4)
Top Cover
Focus Lens Lock Screw
Locate the Motor on right side.
Lens Attachment
Part No. (610 275 6029)
Connector
Lens Motor Lead
Fig. 2
Lens Attachment
Socket
Lens Attachment for each Lens.
1
Remove the safety lens cap on the rear of
the lens (mounting side). Insert the Lens
Attachment and secure with the four (4) screws
(supplied). (See Fig. 1.)
Screw Driver
(supplied with the optional lens)
Lens Attachment
Type No. (PART No.)
Lens Part No.
Lens Attachment 01
POA-LNA-01
(910 303 8743)
LNS-W01, LNS-W01Z,
LNS-W02Z, LNS-W03,
LNS-W04, LNS-W05,
LNS-W06, LNS-W07,
LNS-T02, LNS-T03,
LNS-S02Z, LNS-S03,
LNS-M01Z
Lens Attachment 02
POA-LNA-02
(910 304 6229)
LNS-S01A, LNS-M01,
LNS-W02,
Fig. 1
Connect the Lens Motor Lead to the socket on
the top right of the Lens Attachment. (Motor
Driven Lens only) (See Fig. 2)
2
Turn off the projector, press the Main On/Off
Switch to Off and unplug the AC power cord
from the AC outlet.
To Next Page
Loading...
