Sanyo PLC-XF1000 - Manual PC Adjustment

-36-
Mechanical Disassembly
12-1 Fans removal
1 Remove fans on the bottom of the optical lamp unit.
FN908 with 2 screws-B(T3x40), FN909 with 2 screws-C(T3x40).
2 Remove fans on the top and side of the optical lamp unit.
Remove 1 screw-D(T3x6) and remove 2 screws-E(M3x10) and remove FN911.
Remove 1 screw-F(T3x6) and remove 2 screws-G(M3x10) and remove FN910.
Remove 2 screw-H(T3x12) and remove FN912.
C
E
B
B
G
H
D
F
FN912
FN908
FN909
FN911
FN910
13 Lens cover holder and noise filter unit ass'y removal
1 Remove 3 screws-A(T4x10) and remove the lens cover holder upward off.
2 Remove 2 screws-B(T4x10) and remove the noise filter unit ass'y upward off.
A
A
A
B
B
Noise filter unit ass'y
Lens cover holder
Grounding lead