Sanyo PLC-XF1000 - Setting Configuration

-48-
Optical Parts Disassembly
9 Optical lamp unit top removal
1 Loosen 2 screws on the each lamp house and take the lamp houses upward off.
2 Remove 2 screws-A(T3x8) and remove the lamp fan net board.
3 Remove 2 screws-B(T3x12) and remove the fan (FN912).
4 Remove 4 screws-C(M3x40) and screw-D(M4x6) and remove the optical lamp
unit top.
Lamp houses
C
A
A
B
B
C
C
C
D
FN912
Lamp fan net
board
Optical lamp
unit top
9-1 Optical lamp unit disassembly
Remove each 1 screw-A(M3x10) on the stopper of the mirror and remove mirror.
A
A
A
A
Optical filter
Stopper