-42-
Optical Parts Disassembly
2 Polarized glass/Optical filter ass'y removal
Remove 2 screws-A (M3x6) on each stopper and take the polarized glasses upward
off.
A
A
A
Polarized glass/Optical filter ass'y
(M2x2)
(M2x2)
(M2x2)
(M2x2)
(M2x2)
Polarized glass-(IN)*
Pre-Polarized glass-(IN)
Optical filter(HCP)
TH901(Thermal sensor)
Only the B-Polarized glass/Optical
filter ass'y provides these parts.
Marking
Prism side
Holder
* Note on handling the polarized glasses
Polarized glass-(IN/GB) and Polarized glass-(IN/G) are very sensitive parts. Never touch or wipe the both surfaces. Grab
the edge of the glass by new gloves when handling the polarized glass. When removing the dust on the surface, use a com-
mercial (inert gas) air spray to remove them. Never use organic solvents.
To Next Page
Loading...
