Sanyo PLC-XU106

-40-
Electrical Adjustments
Group/
Item
Item Name Function Initial Range Note
223 BLANK_GCENTER 0 0-2047
224 BLANK_GSTART 128 0-255
225 BLANK_GEND 128 0-255
226 BLANK_BCENTER 0 0-2047
227 BLANK_BSTART 128 0-255
228 BLANK_BEND 128 0-255
229 Output limit R 4095 0-4095
230 Output limit G 4095 0-4095
231 Output limit B 4095 0-4095
232 CROSSTALK_COEF_R 1023 0-1023
233 CROSSTALK_COEF_G 1023 0-1023
234 CROSSTALK_COEF_B 1023 0-1023
235 LCCON_ENABL 0 0-1
236 ENBY_L1 12 0-255
237 ENBY_H1 675 0-1026
238 ENBY_L2 12 0-255
239 ENBY_H2 675 0-1023
Group101 : Panel Service(6150/1060)
0 R-LCCOM 128 0-255
1 G-LCCOM 128 0-255
2 B-LCCOM 128 0-255
3 R-ENBX-PW 4 0-15
4 G-ENBX-PW 4 0-15
5 B-ENBX-PW 4 0-15
6 R-DXIN 38 28-64
7 G-DXIN 38 28-64
8 B-DXIN 38 28-64
9 R-ENBX1IN 17 0-31
10 G-ENBX1IN 17 0-31
11 B-ENBX1IN 17 0-31
12 Vmid 150 0-255
13 R-Ref 150 0-255
14 G-Ref 150 0-255
15 B-Ref 150 0-255
Group102 : Auto Keystone Setup Value
0 OFFSET 0
-1056 -
1056
1 OFFSET SWITCH
0
0 - 1
2 DEBUG MODE
0
0 - 1
3 SERVICE CALIBRATION
0
0 - 1
4 LOCK COUNT
5
1 - 255
5 DELT VERT RESULT
64
1 - 255
6 ANGLE 1 COUNT
1
1 - 10
7 ANGLE 2 COUNT
5
1 - 10
8 BLIND SECTOR 1
160
0 - 1024
9 BLIND SECTOR 3
32
0 - 1024
10 BLIND SECTOR BIAS
61
0 - 1024
Group
200
Option
0
Logo Prohibition (Forced No
Brand)
Logo Prohibition (0: Menu, 1: Forced,
2: China, 3-9: not used)
0 0 - 2 Effective after AC On
1 RS232C Baudrate Baud Rate 0 0 - 2
0: 19200bps, 1: 9600bps, 2:
115200bps
4 CABLE SW Long Cable 0 0 - 10 0: Disable, 1: Enable
5
PW Debug Command
Enable
0 0 - 1
0:Disable (Serial Command Eanble)
1: Enable (PW Debug Mode)
6 Device Refresh Disable 0 0 - 1
0:Enable, 1:Disable
No last memory
7 Device Access Disable 0 0 - 1
0:Enable (Normal), 1:Disable
No last memory
30 Lamp life test enable
0:Disable 1:Enable, for safety test
only
31 Lmap On time(for life test) For test purpose
32 Lamp Off time(for life test) For test purpose
33 Lamp total time(for life test) For test purpose
40 Lamp PWM PresAv 50Hz 80 0-255
41 Lamp PWM PresAv 60Hz 67 0-255
42 Lamp PWM PresUnlock 65 0-255