Sanyo PLC-XU115 Service Manual

Multimedia Projector
SERVICE MANUAL
PRODUCT CODE
1 122 386 00 (KF3AC)
1 122 387 00 (LF3AC)
1 122 387 02 (LF3CC)
REFERENCE NO. SM5110954-00
FOREWORD
For your convenience, all service parts, identified in this manual are available through Eiki’s normal distribution chan-
nels.In addition to service part number, the generic descriptions have been given, where possible, to allow your service
technicians to substitute equivalent components which might be available from other sources.
All orders for service parts will be honored. However, in instances where generic components are considered to be
available from several common sources, as would be the case with an industry standard fuse, resistor, or semiconduc-
tor, it may be more economical and expeditious to purchase the part locally.
Give complete “Chassis No.” for parts
order or servicing, it is shown on the
rating sheet on the cabinet on the projector.
Model No. PLC-XU115
U.S.A, Canada,
Europe, U.K, Asia
Chassis No. KF3-XU11500
Original Version
FILE NO.

Sanyo PLC-XU115 Specifications

General

Projection distance	0.93/11.47 m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-40 - 40 °
I/O ports	SD Card Slot
Audio input	1
Aspect ratio	4:3
Special features	Soft Carry Bag
Networking features	Ethernet & Wireless
F-number (relative aperture)	1.7
Lamp type	NSH
Lamp power	275 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Dot clock scanning frequency	140 MHz
Analog signal format system	NTSC, PAL, SECAM
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (typical)	266 W

Weight and Dimensions

Package weight	3500 g