Sanyo PLV-80 - Locations and Directions

-17-
When the optical parts in the optical unit mounting or assembling,
the parts must be mounted in the specified location and direction as
shown in figure below.
Optical Parts Disassemblies
14
12
8
Fig.7
3
14
1
2
4
9
13
6
1 Condenser lens (R)
2 Condenser lens
3 Condenser lens
4 Mirror (B)
5 Optical filter (UV cut)
6 Dichroic mirror (B
7 Dichroic mirror (G)
8 Mirror (W)
9 Condenser lens (IN)
10 PBS (prism beam splitter)
11 Integrator lens (OUT)
12 Integrator lens (IN)
13 Relay lens (IN)
14 Mirror (R)
7
10
11
5
The printed marker
comes this side.
The cutting corner
comes to this side up.
Key No. Description
Locations and Directions
The printed marker
comes this side.