Sanyo PLV-80 - Error History Log

-57-
Error Error Code
Error Infomation
(See Powe Failure Detection Tree)
Normal 0 -
Power Failure
1000 AV -5V
1001 AV S5V
1002 PJNET S5V
1003 ANALOG 6V
1004 ANALOG 3.3V
1005 ( MAIN 3.3V )
1006 MAIN S-5V
1007 ( MAIN 6V )
1008 FAN
1009 M/A
1010 ANALOG 1.8V
1011 FPGA 1.5V
1012 GAMMA 1.8V
1013 GAMMA 15.5V
1014 GAMMA 5V
1015 GAMMA 12V
Temperature Error
2000 Sensor A detects abnormal temperature.
2001 Sensor A fails measurement.
2100 Sensor B detects abnormal temperature.
2101 Sensor B fails measurement.
2102 Sensors B-A temperature error.
2200 Sensor C detects abnormal temperature.
2201 Sensor C fails measurement.
2202 Sensors C-A temperature error.
Lamp Error
3000 Lamp1 fails on
3001 Lamp1 goes out
3002 Communication Error on Lamp1
Error History Log
This projector provides the error history log function. To check the logs, you need to enter the service mode and select
Group No. "91" and Item No. "0" to "49". The error code is displayed on the Data column. The description of the error
code is listed on the table below.
How to enter the service mode and selection of the group and item, see "Service Adjustment Menu Operation" on
page 23.
Group No. Item No. Data (Error Code) (See table below)
91 0
✽ <- Latest Error
1
✽
2
✽
3
✽
.
✽
.
✽
.
✽
48
✽
49
✽