-37-
Not designated PC AV Component
200-11 & 12 PC White balance adjustment. 2 lamp mode ●
210-11 & 12 AV White balance adjustment. 2 lamp mode ●
211-11 & 12 AV White balance adjustment. Lamp-1 of 1 lamp mode ●
212-11 & 12 AV White balance adjustment. Lamp-2 of 1 lamp mode ●
1000-25 AV Color adjustment ●
1000-24 AV Tint adjustment ●
1010-0 AV Green Video signal adjustment ●
1010-1 AV Green Video signal adjustment ●
1010-2 AV Red Video signal adjustment ●
1010-3 AV Red Video signal adjustment ●
1010-4 AV Blue Video signal adjustment ●
1010-5 AV Blue Video signal adjustment ●
0-0 Temperature monitor IC5801 Read only ●
0-1 Temperature monitor IC2561 Read only ●
1-0 Atmospheric Pressure monitor IC886 Read only ●
10-0 RS232C Baud rate (0:9600 / 1:19200) ●
10-1 RS232C RTS/CTS Flow Control (0:Disable / 1:Enable) ●
111-0 Lamp-1 Lamp illumination time Read only ●
111-1 Lamp-2 Lamp illumination time Read only ●
930-0 Lamp mode 2 (Full) Lamp Mode (See Note.) ●
930-1 Lamp mode Lamp-1 of 1 Lamp Mode (See Note.) ●
930-2 Lamp mode Lamp-2 of 1 Lamp Mode (See Note.) ●
998-0 Grid Test Pattern Display ●
Group & Item No.
Adjustment Item
Input Mode
Note : Group-no. 930
■ If the data value appears "11" on the screen, the lamp
mode is selected.
■ If the data value appears "0" on the screen, the lamp
mode is not selected. Set the data value to "10."
■ If the data value appears "99" on the screen, it is period
for cooling of the lamp. Wait until it is changed to "0."
Then set the data value to "10."
Caution :
Other adjustment items are not related to service and a main-
tenance. Don't change the data values of those adjustment
items. Otherwise it may cause loss of product safety.
To Next Page
Loading...
