15
Video Equipment
S-video
Cable
S-VIDEO
Output
S-VIDEOVIDEO
Composite
Video Output
Video Cable
(RCA x 1)
Video, S-video
Use a video cable or a S-video cable (commercially available).
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting the cables.
Video Equipment
Component Video Output
(Y, Pb/Cb, Pr/Cr)
COMPONENT
Component
Use a component cable (optional).
Connecting to Video Equipment (Component)
Component
Cable
(RCA x 3)
Note:
• To order the optional cables, see page 58.
• When connecting HDTV equipment to the projector’s
COMPONENT 1/2 terminals, horizontal line noise may be noted
only occasionally. Then adjust the value of Fine sync.The setting
can be adjusted from 0 to +31 (see page 34).
This projector can be connected up to six equipment at one time. See the figures below for the connections.
Connecting to Video Equipment (Video, S-Video)
Installation
To Next Page
Loading...
