0. SAFETY PRECAUTIONS
0－12
MANDATORY
<Storage>
1. Store these units where they are not exposed to direct sunlight and in the
specified ranges of temperature and humidity {–20°C to +65°C, below 90%RH
(without dew condensation)}.
2. When the amplifier was stored for a long period (over 3 years as a guide), please
contact us for how to treat it.
When it is stored for a long time, the electrolytic capacitor capacity will decrease
and any trouble may occur.
<Operation>
3. Install an emergency stop circuit outside the system so that operation can be
stopped immediately and that the power supply can be shut off.
4. When the alarm generates, assemble the safety circuit outside of the amplifier.
Running away, injury, burning, fire, and secondary damage may be caused.
5. Operate the system within the specified ranges of the temperature and humidity
(see below).
Amplifier: Temperature = 0 to 55°C, Humidity = 90% RH or lower (no dew
condensation)
Motor: Temperature = 0 to 40°C, Humidity = 90% RH or lower (no dew
condensation)
<Transportation>
6. Overloaded products will collapse.
So, load them in accordance with the indication on the outer cases.
7. Use the lifting bolts on motors for carrying motors only and don't use them for
carrying machines.
To Next Page
Loading...
