Sanyo SUPER BL PY - 6. OPERATION

6. OPERATION
6－1
OPERATION
6.1 Operation Sequence .................................................................... 6-2
6.1.1 Power ON Sequence ........................................................ 6-2
6.1.2 Stop Sequence.................................................................. 6-3
6.1.3 Servo OFF Sequence ....................................................... 6-5
6.1.4 Alarm Reset Sequence ..................................................... 6-6
6.1.5 Overtravel Sequence ........................................................ 6-7
6.2 Display ......................................................................................... 6-8
6.2.1 Status Display ................................................................... 6-8
6.2.2 Alarm Display .................................................................... 6-8
6.3 Be Sure to Check the Functioning at First ................................... 6-9
6.3.1 Minimum Wiring ................................................................ 6-9
6.3.2 Jog Operation.................................................................... 6-10
6.3.3 Reseting and Turning the Power Off ................................. 6-12
6.4 Encoder Clear Using Remote Operator
(When Absolute Encoder is Used)............................................... 6-13