143 English
TV SYSTEM SETTING
This setting is to specify the type of image signal that is output from the
camera’s DIGITAL/AV terminal.
1 Display the Option Setting Mode
Screen (see page 133).
2 Select the TV system icon , and
press the SET button.
h The TV System Setting Screen
appears.
3 Select the appropriate TV system,
and press the SET button.
CAUTION
i If the TV system setting is not correct for the connected TV, you will not be
able to view the images on the TV.
i No image appears on the camera’s LCD monitor when the dedicated AV
cable is connected to the camera’s DIGITAL/AV terminal (see page 171).
NTSC: Output NTSC video signals
PAL: Output PAL video signals
OPERATION BEEP
GUIDANCE
LANGUAGE
REFORMAT
CLOCK SET
TV SYSTEM
NTSC
PAL
TV SYSTEM
Camera_EN.book Page 143 Sunday, August 31, 2003 3:48 PM
To Next Page
Loading...
Need help?
General
