Sanyo VPC-J2 - Iso Sensitivity Setting

107 English
ISO SENSITIVITY SETTING
With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
1 Display an EXPERT Mode Shooting
Setting Screen (see page 94).
2 Select the desired ISO sensitivity
setting from the ISO sensitivity
menu.
3 Press the SET button.
h This completes the ISO sensitivity setting.
HINT
i By setting a higher ISO sensitivity, you can set higher shutter speeds and
capture images in darker locations, but noise in the captured images may
increase.
: Sets the ISO sensitivity automati-
cally (equivalent to ISO50 to 200
[video clip shooting mode:
ISO200 to 800]).
: Sets the sensitivity to ISO50 equivalent (still image and sequen-
tial shots shooting modes only).
: Sets the sensitivity to ISO100 equivalent (still image and sequen-
tial shots shooting modes only).
: Sets the sensitivity to ISO200 equivalent.
: Sets the sensitivity to ISO400 equivalent.
: Sets the sensitivity to ISO800 equivalent (video clip shooting
mode only).
: Sets the sensitivity to ISO1600 equivalent (video clip shooting
mode only).
EXPERT
AUTO
ISO
<Example: Still image
shooting mode>
Camera_EN.book Page 107 Sunday, August 31, 2003 3:48 PM