English 170
3 Adjust the printer settings.
1 Press the [] or [k] arrow button to select the printer setting parame-
ter, and press the SET button.
h The screen to set the selected parameter appears.
2 Press the [] or [k] arrow button to adjust the setting, and press the
SET button.
h The selected parameter is set, and you are returned to the Printer
Settings Screen.
h Follow the same procedure to adjust the other parameters, as
desired.
h The contents of the settings that can be made for each parameter
will differ depending on the printer.
<When “PRINTER SETTINGS” is selected>
h The images will be printed according to the setting specified on
the printer side.
4 Select “EXIT”, and press the SET button.
h You are returned to the PictBridge Screen.
HINT
i The printer setting parameters will differ depending on the printer that is
connected.
i To use printer functions which do not appear on your camera’s Printer Set-
tings Screen, select “PRINTER SETTINGS”.
i If a function set by the camera is not available in the printer, the camera’s
printer setting will automatically change to “PRINTER SETTINGS”.
Camera_EN.book Page 170 Sunday, August 31, 2003 3:48 PM
To Next Page
Loading...
