Sanyo VPC-J2 User Manual

English 182
Question Answer Action
Misc.
Why is a noise
heard from a
nearby TV or
radio during
battery
recharging?
Electromagnetic
waves are emitted
from the battery
charger.
Move the battery
charger further
away from the TV
or radio when
recharging
batteries.
Why does the
“MEMORY FULL”
message appear?
There is no more
available memory
on the card.
Erase
unnecessary data.
Use a card that
has more memory
available.
Why does the
“CARD LOCKED”
message appear?
The write-protect
tab on the card is
in the locked
(protect) position.
Move the
write-protect tab
to the unlocked
position.
Why can’t the
digital camera be
operated?
A temporary
internal circuitry
problem may be
the cause.
Remove the
battery pack from
the digital camera,
wait a few
minutes, then
reinstall the
battery pack and
try again.
Can I use my
digital camera
abroad?
— When the camera
is connected to a
TV, you can
switch the
camera’s video
output to NTSC or
PAL. If you have
questions about
using the battery
recharger and
power cord
abroad, please
consult with a
dealer near you
for advice.
Camera_EN.book Page 182 Sunday, August 31, 2003 3:48 PM

Sanyo VPC-J2 Specifications

General

Brand	Sanyo
Model	VPC-J2
Category	Digital Camera
Language	English