English 50
Shoot a still image while recording a video clip
You can capture a still image while recording a video clip.
1 Turn on the camera (page 40).
2 Set the main switch to REC.
3 Press the video clip recording
button [R].
4 When you see a scene you’d like to
capture as a still image, press the
still image shooting button [S].
5 End the recording.
h Press the video clip recording
button to stop recording.
NOTE
i When shooting a still image while recording a video clip, the flash does not
operate.
i When shooting a still image while recording a video clip, the display briefly
pauses, and then returns to the video clip display after the still image is
captured.
i If the still image resolution is set to k, it automatically changes to r
and the image is captured.
i When the remaining card memory becomes 10 percent or less of the total
card capacity, the remaining memory icon appears on the LCD monitor.
00:00:25
REC
PLAY
Main switch
Video clip recording button
Still image shooting button
To Next Page
Loading...
Need help?
General
