81 English
LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
Light is measured by sampling from multiple areas of the entire shooting
screen.
Center-weighted light-measuring:
Light is measured from the entire shooting screen, but gives more importance
to the values near the center.
Spot light-measuring:
You can compose the picture and capture the image after first measuring the
light only at the center spot of the LCD monitor.
1 Display the PAGE 2 Shooting Setting Screen (page 62).
2 Select the desired light-measuring mode from the light-measuring
mode (EXP MEASURE) menu.
n: Multi-section light-measuring
W: Center light-measuring
Y: Spot light-measuring
3 Press the SET button.
h This completes the light-measuring
mode setting.
h When spot light-measuring is
selected, the light-measuring spot
mark appears in the center of
the LCD monitor.
00: 00 : 5212
Light-measuring spot mark
To Next Page
Loading...
Need help?
General
