143 English
CONNECTING TO OTHER EQUIPMENT
Connecting to a computer or printer
Use the supplied USB interface cable to connect the DIGITAL/AV
terminal of the docking station to the USB terminal of a computer or
printer.
i Connect the dedicated USB interface cable to your computer’s USB
connector. Do not connect it to the USB port on your monitor or keyboard,
or to the USB hub. Be especially careful when installing the driver
software. In some instances, it may not be possible to correctly install the
driver software.
i Please refer to the included SANYO Software Pack instruction manual for
information regarding operating your camera from a computer.
Connecting to a TV
Use the supplied S-AV interface cable to connect the docking station to
the TV.
i When the camera’s monitor unit is closed and the camera is set in the
docking station, press the CAMERA/CHARGE button on the docking
station to light the CAMERA indicator.
i The remote control unit can be used for playback (page 145).
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
To AC adaptor/
charger
To USB connector on the
computer or printer
DIGITAL/AV terminal
Supplied USB interface cable
The [n] mark on the plug is facing down.
To Next Page
Loading...
Need help?
General
