Sanyo Xacti VPC-C5 - Preparing and Using the Remote Control Unit

145 English
PREPARING AND USING THE REMOTE CONTROL UNIT
Use the supplied remote control unit to play back data from the docked
camera.
Remote control unit button operation
1 CH. (channel)
h Switch the remote control code (page 148).
2 SET
h Same operation as the camera’s SET button.
3 MENU
h Same operation as the camera’s MENU button.
4 [G]
h Works the same as toggling the camera’s SET button to the left.
5 [I]
h Works the same as toggling the camera’s SET button up.
6 [H]
h Works the same as toggling the camera’s SET button to the right.
7 [J]
h Works the same as toggling the camera’s SET button down.
CH.
MENU
SET
1
2
3
4
5
6
7