Operating Instructions Stainless Steel In-Line Filter Holder Type 16274 29
Technical Data
Corrosive agents Concentration
[%]
Test conditions:
Duration [days];
Temperature [°C]
Stainless steel
1.4401
Glycerin 7; 20 Resistant
n-Heptane 7; 20 Resistant
n-Hexane 7; 20 Resistant
Isobutanol 7; 20 Resistant
Isopropanol 7; 20 Resistant
Isopropyl acetate 7; 20 Resistant
Methanol 98 7; 20 Resistant
Methyl acetate 7; 20 Resistant
Methyl ethyl ketone 7; 20 Resistant
Methylene chloride 7; 20 Resistant
Methyl isobutyl ketone 7; 20 Resistant
Monochlorobenzene 7; 20 Resistant
Nitrobenzene 7; 20 Conditionally resistant
n-Pentane 7; 20 Resistant
Perchloroethylene 7; 20 Resistant
Pyridine 7; 20 Resistant
Carbon tetrachloride 7; 20 Resistant
Tetrahydrofuran 7; 20 Resistant
Toluene 7; 20 Resistant
Trichloroethane 7; 20 Resistant
Trichloroethylene 7; 20 Resistant
Xylon 7; 20 Resistant
Acids
Corrosive agents Concentration
[%]
Test conditions:
Duration [days];
Temperature [°C]
Stainless steel
1.4401
Acetic acid 25 7; 20 Resistant
Acetic acid 96 7; 20 Resistant
Hydrofluoric acid 25 7; 20 Not resistant
Hydrofluoric acid 50 7; 20 Not resistant
Phosphate acid 85 7; 20 Conditionally resistant
Nitrate acid 65 7; 20 Not resistant
Hydrochloric acid 37 7; 20 Not resistant
To Next Page
Loading...
