28 Operating Instructions Stainless Steel In-Line Filter Holder Type 16274
Technical Data
12.6 Materials
Housing Stainless steel 1.4401
Seal Silicone (standard)
EPDM (optional)
Fluoroelastomer (optional)
PTFE (optional)
12.7 Compatibility of Media and Materials
The device is deemed resistant to a chemical only if both the material and the seal used are resistant.
12.7.1 Chemical Resistance of the Device Materials
Solvents
Corrosive agents Concentration
[%]
Test conditions:
Duration [days];
Temperature [°C]
Stainless steel
1.4401
Acetone 7; 20 Resistant
Ethanol 98 7; 20 Resistant
Ethyl acetate 7; 20 Resistant
Ethylene glycol 7; 20 Resistant
Petrol 7; 20 Resistant
Benzene 7; 20 Resistant
Benzyl alcohol 7; 20 Resistant
n-Butanol 7; 20 Resistant
n-Butyl acetate 7; 20 Resistant
Cellosolve 7; 20 Resistant
Chloroform 7; 20 Resistant
Cyclohexane 7; 20 Resistant
Cyclohexanone 7; 20 Resistant
Diethylether 7; 20 Resistant
Diethylacetamide 7; 20 Resistant
Dimethylformamide 7; 20 Resistant
Dimethyl sulfoxide 7; 20 Resistant
Dioxane 7; 20 Resistant
Formalin 30 7; 20 Resistant
Formamide 7; 20 Resistant
To Next Page
Loading...
