11
You can display, enter or change the
following parameters:
In addition to basic weighing
functions, you can use the
Combics 2 to calculate and
display weighing data as follows:
– Counting
– Neutral measurement
– Averaging (animal weighing)
– Checkweighing
– Classification
– Weighing in percent
– Net-total formulation
– Totalizing
Function: Key assignment for k
»fn-key«
– Gross/net toggling
»gro net«
– Toggle between the 1st, 2nd and
3nd weight unit
(are eycled in the display)
»3. unit«
–
10-fold higher resolution
»Res 10«
– Device parameters »setup«
Device configuration, i.e.,
to meet individual requirements
by selecting predefined menu
parameters in the operating
menu. The device parameters
are combined in the following
groups :
– Weighing platform »wp1«
– Interfaces (COM1 and optional
UniCOM)
– Digital control line »ctrl in«
– Bar code scanner »barcode«
– Printer protocols »prtport«
– Extra Functions: Utilities
»utilit«.
– Timer »time«
– Date »date«
– Set user password »code«
– Display device information
»info« (serial number, etc.)
– Language for calibration and
adjustment records »lang«.
Select the language.
The rest of the menu
is language-independent.
To Next Page
Loading...
Need help?
General
