18
– Press the ) key; the display shows only a flashing cursor.
– Press k to select “2” and then press ) to confirm; the cursor jumps to the
second position; now you can enter the next number. Repeat this procedure
with the appropriate numbers to enter the service password (202122).
Note: If you find that one of the numbers is wrong, press ( to go back to that digit
and change it; then press the ) key repeatedly to return to the sixth digit
(the 2 flashes).
– After entering the last digit, press ) (< 2 sec.) and ( ( (in that order)
to activate the service mode. Setup appears in the display.
A “S” in the upper right-hand corner of the display indicates that the service
mode is active.
To cancel the password input process before it is finished, press ( repeatedly
until CodE is displayed.
Note: The service mode can be deactivated only by turning the off the Combics indicator.
Important: When the service mode is active (password 202122), you can only view the
customer password. The customer password can be deleted only by entering
the general password (40414243) or the customers password.
d_vore12.eps
202122.eps
code_s.eps
To Next Page
Loading...
Need help?
General
