9
Getting Started
Installing the Components
FB06BBE-S
● Place the following components on the scale in the order given below:
– Dust cover
– Place the shield ring on the scale and turn it counterclockwise until it is
securely positioned in place
– Load plate support
– Load plate
– Glass cylinder
– Draft shield cover
FB6CCE-H, FB2CCE-S, FB12CCE-S, FB6CCE-S, FB12CCE-I
● Place the following components on the scale in the order given below:
– Dust cover (remove backing from the adhesive surface)
– Load plate shield (depends on the type of model)
– Load plate
FBG34EDE-H, FBG34EDE-P, FBG16EDE-H, FBG12EDE-P, FBG64EDE-S,
FBG64EDE-H
● Position the load plate
To Next Page
Loading...
