Factory Settings of the Parameters
Automatic storage:
Off
Minimum load for automatic storage:
10 digits
Source of data for auto storage:
Application 1
Evaluated values: Net
Evaluation mode, MR key function:
Intermediate
evaluation, print
M+/M– function, then tare: Off
Printout of individual components: Yes
Stability range: 2 digits
Printout: Application-defined output:
Print on request then tare:
Off
101
Soft Key Functions
M+ Add weight values or application
values to the total in the totaliz-
ing memory. The component
or transaction counter value
increases by one each time you
press this key.
M- Delete the last value added to
memory. The transaction
counter value decreases by 1.
You cannot delete previous values
by repeatedly pressing this key.
MR Print or display an intermediate or
final evaluation
nDef Store the input number of
components
Printout of Statistics
The transaction or component counter is
printed in front of each measured value
(weight). When an intermediate or final
evaluation is printed out, all results up to
this point are included.
n5
Total +151.67321 g
Avg. + 33.0 pcs
s + 3.2 pcs
srel + 9.70 %
Total + 165 pcs
Min + 29 pcs
Max + 37 pcs
Diff + 8 pcs
n: Transaction counter
Total: Sum of all values
Mean: Average
s: Standard deviation
srel: Variation coefficient
Total: Sum of all values
Min: Minimum
Max: Maximum
Diff: Difference between minimum and
maximum
To Next Page
Loading...
