121
Example: Density determination with statistical evaluation
Density determination of a solid sample using the displacement method with water and statistical evaluation
of 10 measurements
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1 (basic settings): Density: Method: Displacement
Setup: Application parameters: Application 1 (basic settings): Density: Decimal places for disp. of vol.: 2 decimal places
Setup: Application parameters: Application 2 (control functions): Off
Setup: Application parameters: Application 3 (data record): Statistics: Evaluated values: Calculated
Setup: Application parameters: Extra function (F4): Man. store in app.3 memory (M+)
Step Press key(s) (or follow instructions) Display/Output
1. Delete previously stored values, c
if necessary
2. Change the parameters to the
Param. soft key
ones listed above, if not already set
and save
oo soft key
3. Position the sample holder
(immerse in water)
4. Tare the balance t
5. Determine the weight of the sample
in air: place sample on the
weighing pan
6. Store weight value
Wa soft key
Practical Combination of Several Applications