Features
– Choose from 2 methods for determining
density of solids:
– Buoyancy, or
– displacement.
– Density determination of powdered or
pasty samples using the pycnometer
method
– Density determination of liquids using
the liquid density method
– Choice of liquids for buoyancy:
– Water
– Ethanol
– Other liquids (user-definable)
– Reference values can be entered using
the numeric keys
– Weight of sample in air (Wa)
– Weight of sample in liquid, or weight
of reference liquid when using the
pycnometer (Wfl)
– Weight of sample and
reference liquid when using the
pycnometer (Wr)
– Long-term storage of parameters:
– Temperature
– Air buoyancy correction
– Air density
– Density of reference liquid
– Expansion coefficient
– Plummet volume
Factory Settings of the Parameters
Method:
Buoyancy
Liquid causing buoyancy: Water
No. of decimals for display of vol. density:
2 decimals
Printout: None
Soft Key Functions
Wa Store weight of sample in air
Wfl With liquid density, buoyancy
and displacement methods:
– Store weight of sample
in liquid
With pycnometer method:
– Store weight of
reference liquid
Wr With pycnometer method:
Store weight of sample and
liquid
Start Start a new measurement
routine
Param. Toggle to parameter input
mode (depending on method
selected)
Densit Display the density (the
parameters set remain
effective for the next
measurement)
Weigh Display the weight (the
parameters set remain
effective for the next
measurement)
Vol. Display the volume (the
parameters set remain
effective for the next
measurement)
70
Purpose
With this application you can determine
the density and volume of solid, pasty, liq-
uid or powdered samples.
You can use this application in combination
with any program chosen from Application
2 (e.g., checkweighing, timer functions)
and one from Application 3 (totalizing,
formulation, statistics) as well as with the
extra functions.
Density Determination E
To Next Page
Loading...
Need help?
General
