Purpose
With this application, you can determine
the number of pieces of approximately
equal weight.
You can use this application in
combination with a program chosen
from Application 2 (checkweighing,
time-controlled functions) and one from
Application 3 (totalizing, formulation,
statistics), as well as with the extra
functions.
61
Counting
A
Features
– Optional balance configuration in
Setup for automatically initializing
this application and loading the most
recent reference sample quantity “nRef”
and average piece weight “wRef” when
you switch on the balance (this is the
automatic setting when the balance is
initialized; Setup menu: Application
parameters: Auto-start app. when
power goes on: On
– Reference sample quantity “nRef”
entered manually
– Average piece weight “wRef” entered
manually
– Storage of the current weight value for
the preset reference sample quantity
“nRef,” to be loaded when the Counting
program is initialized
– Setting the accuracy when the
reference sample weight “wRef” is
stored for calculating a piece count
– Automatic output of the quantity and
sample weight via the data interface
port after initialization or reference
sample updating while running the
Counting program (Printout:
Application-defined printout: Auto
print upon initialization: All values)
– Toggling between piece count and
weight value by pressing the
Count.
or Weigh. soft key
– Toggling between counting and
additional applications using the
d key (for example, checkweighing)
Factory Settings of the Parameters
Accuracy when calculating piece weight:
Display accuracy
Reference sample updating:
Automatic
Soft Key Functions
nRef Store value input as reference
sample quantity
wRef Store input value as reference
sample weight
Update Reference updating criteria
met; reference updating can
be performed to optimize the
accuracy
Count. Toggle to the Counting
application
Weigh. Toggle to the Weighing mode
Start Store current weight value for
preselected piece count
To Next Page
Loading...
