4
About the Product (Warranty)
With this Sartorius Balance you have acquired a high-quality
electronic weighing Instrument that will ease your daily work-
load.
Please read these Installation and operating instructions care-
fully before operating your new balance.
Pursuant to the German Directive for the Implementation
of Regulations for Prevention of Accidents "Elektrische
Anlagen und Betriebsmittel (VBG 4)" [Electrical
Installations and Equipment] of April 1986, it is hereby
certified that the equipment delivered, "Electronic
Microbalance, model M 500 P," is manufactured and
tested in compliance with the following DIN/VDE
regulations
DIN IEC 348/VDE 0411 Safety requirements for
electronic measuring apparatus
DIN IEC 380/VDE 0806 Safety of
electrically energized Office
machines
DIN IEC 601/VDE 0750 Safety of medical electrical
equipment
and Article 10 of the Low Voltage Directive (73/23/EEC)
issued on February 19, 1973 by the European
Community. When you use electrical equipment in
installations and under ambient conditions requiring
higher safety Standards, you must comply with the
provisions as specified in the applicable regulations for
installation in your country.
To Next Page
Loading...
