Sartorius MW1 - Intended Use; Symbols

Midrics
®
1 and 2 are rugged complete
scales for the demanding area of daily
quality control. They meet the highest
requirements placed on the accuracy
and reliability of weighing results:
– in the food industry
– in the pharmaceutical industry
– in the chemical industry
– in the electronics and metal-working
industries
Midrics
®
complete scales are:
– Rugged and durable
(stainless steel housing)
– Easy to clean and disinfect
– Easy to operate, thanks to:
– large, backlit display segments
– large keys with positive click action
– Independent of the weighing platform
location
– Equipped with a range of interfaces
for flexible use
– Password-protected from unauthorized
changes in the operating menu
Additional characteristics (Midrics
®
2):
– Input functions for tare values
through numeric keypad
– Option for 4 alphanumeric lines
to identify samples
– Fast response times
– Designation of weight values with up
to 4 lines of alphanumeric text
– Built-in application programs for:
– Counting
– Neutral measurement
– Weighing in percent
– Averaging
– Checkweighing
– Classification
– Net-total formulation
– Totalizing
– Automatic initialization when the
Midrics is switched on
– Automatic taring when the first load
is placed on the weighing platform
– Optional remote control using an
external computer
Symbols
The following symbols are used
in these instructions:
§ denotes general operating instructions
$ indicates instructions for exceptional
cases
> describes the outcome of an
operating step
!indicates a hazard
Intended Use
2