Product Order No.
COM1
RS-232 YDO01M-232
RS-232+CLOCK YDO01M-232CLK
Optional UniCOM interface
Interface module (RS-232) YDO01M-232CO
Interface module (RS-485), electrically isolated YDO01M485
Digital I/O, 5/5, opto-isol. YDO01M-IO
Analog current output, 0–20mA, 4–20mA, 0 to 10 volts, 16 bit YDA01M-20MA
Ethernet YDO01M-EN
External interface adapters
Cable for connecting RS-232 data interface to USB port on a computer
2)
YCC01-USBM2
Electrical Accessories
External red/green/red display with 12-pin round male connector (IP67) for scale/display and YRD14Z
control unit YCC02-R12F6 adapter cable or Option M6 required
Remote display; connecting cable YCC02-D25F6 or Optioin M31 (required) YRD02Z
Relay box for connecting scales to external controllers, with 4 (5) relay outputs (250V/3A) YSB01
and 1 opto-electronic coupler input (0–30V), YCC02-RELAIS02 connecting cable required
Additional Options
Dust covers (set of 2) YDC01SW
Cable gland (PG) for cables with diameter of 4.5 to 9 mm, IP67, M16 + 1.5 YAS04CIS
Kit for control panel installation 3) YAS03MI
Software
Sartorius WinScale driver software for Windows 95/98/2000/NT with real-time readout display YSW03
and verifiable electronic data storage. YCC-R12F6 RS-232 connecting cable (option M6) required
SartoConnect data transfer software for connecting your Sartorius scale to a computer; YSC01L
(includes cable for connecting the scale to a computer (12-pin <–> 9-pin); length: 1.5 m)
YCC02-R12F6 connecting cable (Option M36) required
Power Supply Options
10–30 volt module YAS02MI
Rechargeable battery (external; operating time: 10h; charging time: 8h), with charging unit YRB08Z
Cable with cable gland for Sartorius weighing instruments; one end open, YCC02-RB03
other end 2-contact phone jack, 0.8 m
77
To Next Page
Loading...
Need help?
General
