Chapter 4 Setup Menus
30
4.8 Access Control Menu
This menu can be only accessed via the Setup Change Menu
(CHG). It is used in order to:
• change the user password
• enable or disable password check
To view an option setting:
Press to activate the middle window.
Use the up/down arrow keys to scroll to the desired option (PASS
or CtrL).
Password Setting Password Protection Control
To change the password:
Press to activate the lower window.
Use the up/down arrow keys to modify the password. The password
can be up to four digits long.
Press to store your new password, or to leave the
password unchanged.
To enable/disable password checking:
Press to activate the middle window, and then use the
up/down arrow keys to move to the CtrL entry.
Press to activate the lower window.
Use the up/down arrow keys to change the password checking
status: select OFF to disable password protection, or select On to
enable password protection.
Press to store your new option, or to leave the
option unchanged.
To quit the setup menu:
From the middle window, press or .
Store your password in a safe place. If you do not provide the
correct password, you will need to contact your local
distributor for the super-user password to override password
protection.
SELECT
CH
To Next Page
Loading...
Need help?
General
