Satel PERFECTA-T - Page 17

SATEL PERFECTA-T 15
Button □ selecting function to run with button □
Button ▲ selecting function to run with button ▲
Button ■ selecting function to run with button ■
Button ● selecting function to run with button ●
Button ○+● selecting function to run with buttons ○+●
Key fob event do you want to write keyfob use to event log
[218] 8.Name entering the user name
[22] 2.Edit user editing a user
[selecting user]
1.Code editing code
2.Schedule
changing user schedule
3.Partitions selecting supported partitions
4.Add key fob adding keyfob
5.Remov.key fob removing keyfob
Button ○ selecting function to run with button ○
Button □ selecting function to run with button □
Button ▲ selecting function to run with button ▲
Button ■ selecting function to run with button ■
Button ● selecting function to run with button ●
Button ○+● selecting function to run with buttons ○+●
Key fob event do you want to write keyfob use to event log
8.Name editing user name
[23] 3.Remove user removing a user
3.Outputs reset deactivating outputs / activating 21. DETECTORS RESET output
4.Zone bypasses
[41] 1.Inhibit inhibiting zones
[42] 2.Isolate
isolating zones
5.Event log
viewing events
6.Set time setting the clock
7.Troubles / 7.System state
checking troubles / checking system status
8.Outputs ctrl.
controlling the outputs
9.Tests
[91] 1.Zones test starting zone test
[92] 2.Outputs test starting output test
[93] 3.Signal level checking radio signal level
[94] 4.Test event starting manual test transmission
[98] 8.FW versions
checking firmware version of devices
Replace battery
enabling battery replacement in wireless keypad
Service access defining service access rules
Service mode starting service mode