SATO CL608e/CL612e - 1.4 Operation Panel;Displays

PN 9001079
Rev. B
Page 1-5
Section 1. Overview and Specifications
SATO CL608e/CL612e Service Manual
1.4 Operation Panel/Displays
LCD DISPLAY
FEED KEY
COVER
ADVISORY LED'S
LINE KEY
ADVISORY LED'S
POWER Illuminated when power is on.
ONLINE Illuminated when printer is ready to receive data. Turn ON/OFF by
toggling the LINE key.
LABEL Illuminated when label supply is out.
RIBBON Illuminated when ribbon motion sensor does not detect any ribbon
motion.
ERROR Illuminated when there is a system fault such as an open print head.
LCD SCREEN 2 LINE x 16 Character LCD display. Used for setting operational
parameters of the printer and displaying error conditions
LINE KEY Momentary switch. Pressing this key toggles the printer between
the on-line and off-line mode. When the printer is on-line, it is
ready to receive data from the host. This key acts as a pause
during a print job by taking the printer off-line.
FEED KEY Momentary switch. Pressing this key feeds one blank label
through the printer when it is off-line. When the printer is on-line, there is a
user selectable option in the Service Mode (see page 2-28) to either print
a copy of the previously printed label or feed a blank label. The default is
to feed a blank label.