SATO CL608e/CL612e - Replacing the Power Supply

Page 6-10
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Replacing the Power Supply
REMOVE (2) SCREWS
TO DETACH MAIN
CIRCUIT BOARD
REMOVE (2) SCREWS
Fig. 6-9
REMOVE (2) SCREWS AND PULL
AWAY TO DETACH IF INTERFACE
CARD IS INSTALLED
Figs. 6-8
REMOVE (2) SCREWS
Fig. 6-10