SATO CL608e/CL612e - Replacing the Top Half of the Notch;Gap Sensor

Page 6-35
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Replacing the Top Half of the Notch/Gap Sensor
REMOVE SCREW TO
DETACH MEDIA HOLD
DOWN UNIT
Fig. 6-65
Fig. 6-66
REMOVE MEDIA
HOLD DOWN UNIT
FROM THE FRAME
REMOVE (2) SCREWS TO OPEN
COVER AND ACCESS THE
NOTCH/GAP SENSOR
Fig. 6-67
Fig. 6-68
Fig. 6-69
NOTCH/GAP SENSOR