PN 9001079
Rev. B
Page 1-8
SATO CL608e/CL612e Service Manual
Section 1. Overview and Specifications
1.6 Sensors and Switches
Components
POWER SUPPLY UNIT
PLUG-IN INTERFACE
CARD - CENTRONICS
I/O SHOWN
RIBBON SENSOR: This sensor is a
motion detector that signals the printer
when the ribbon supply is turning. This
sensor is used for both the ribbon end and
ribbon near end sensing.
HEAD LATCH LEVER: When the
print head is opened, a micro
switch is activated and the printer
will stop printing. Error message
will be displayed on the LCD
operator panel.
To Next Page
Loading...
