Page 4-15
Section 4. Electric Checks and Adjustments
SATO CL608e/CL612e Service Manual
PN 9001079
Rev.B
4.11 LCD Display Adjustment
STEP PROCEDURE
1. Turn ON the power.
2. Confirm the backlight on the LCD is lit and message is displayed.
3. Adjust the display darkness with VR4 potentiometer (located
underneath a flip-down cover of the front panel) as necessary.
VR 4
POTENTIOMETERS ARE LOCATED
UNDERNEATH A FLIP - DOWN COVER
OF THE FRONT PANEL
To Next Page
Loading...
