SATO CL608e/CL612e - Page 112

Page 6-6
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
INDEXING NOTCH
NO NOTCH ON THIS SIDE
FLASH MEMORY MODULE
INSERT THE FLASH MEMORY
MODULE INTO THE MAIN PCB
MEMORY FRAME AT
APPROXIMATELY 45
0
. NOTE THE
INDEXING NOTCH ON THE
MODULE. GENTLY PUSH DOWN TO
SNAP INTO POSITION
INDEXING NOTCHES
APPROXIMATELY
45
0
ANGLE
Figs. 6-5
Replacing the Main Circuit Board