SATO CL608e/CL612e - Page 121

Page 6-15
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Replacing the Timing Belts
Figs. 6-22
Figs. 6-23
REMOVE SCREW
(ATTACHES TO
REWIND SPINDLE)
PULL REWIND SPINDLE
FORWARD TO
DISLODGE BELT "A"
REMOVE &
REPLACE
BELT "A"
DO NOT DISTURB
THESE TWO
SCREWS
BEARING
BEARING
DISLODGE BELT "B"
FROM MOTOR
SHAFT AND GEARS
LOOSEN
ADJUSTMENT
IDLER SCREWS