SATO CL612e - Page 138

Page 6-32
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
Replacing the Paper End Switch (Micro-Switch) and the
Bottom Half of the Notch/Gap and Eye-Mark Sensors
Fig. 6-59
REMOVE (3) SCREWS
TO DETACH THE RAMP
PLATE FROM THE
RAMP FRAME
Fig. 6-58
RAMP FRAME
RAMP PLATE
REMOVE (3) SCREWS TO
DETACH THE RAMP PLATE
FROM THE BACK PLATE
WIGGLE THE RAMP
PLATE FREE FROM
THE PRINTER
Fig. 6-60
LOOSEN SCREWS FROM
IDLER GEAR PLATE FOR
ACCESS TO SCREW