Section 1: Introduction
Page 1-4 LM Basic 408e/412e Operator’s Manual
Specification Model LM408e Model LM412e
Media Characteristics
Media Types supported Thermal transfer or direct thermal: 0.08 to 0.26mm
Scantro label, Standard Thermal, Super HIgh Sensitivity Thermal,
Logistic Thermal, Synthetic Thermal
Media Size Continuous Width: 22 - 128mm (25 - 131mm)
Pitch: 6 - 178mm (9 - 181mm)
Tear Off Width: 22 - 128mm (25 - 131mm)
Pitch: 20 - 178mm (9 - 181mm)
Media Supply Profile Roll Max Outer Diameter
Inner Diameter of Roll
Wind orientation
8.6 in (210.85mm)
3 in (70.62mm)
Face-in
Fan-fold Maximum folding height
External Supply
100mm
Supported
Carbon ribbon
Material
Dimensions
Core Inner Diameter
Thickness of base material
Color
Winding direction
Be sure to use the specified carbon ribbons manufactured or specified by SATO
Polyester film
Max width 111mm by 450m length
25.6 mm +/- 0.3mm
4.5 to 5.7µm +/-0.5µm (film), 5.8 to 8.3 µm +/- 0.6µm
Black (standard), also red, blue, purple, and green
Face-In
Labels and Ribbons available
Ribbons
Type Wax T102C, T101A, T104C
Wax/Resin T110A, T112D, T123A, T112B, T123B
Resin T222A, R335A, R236A, R333A
Labels
Type Paper Vellum, Semi-gloss Coat, Matt Coat, Gloss Coat
Film Polyester (PET), Polyethylene (PE, white), Polyethylene (PE, transparent)
To Next Page
Loading...
Need help?
General
