Section 1: Introduction
Page 1-2 LM Basic 408e/412e Operator’s Manual
1.1 GENERAL SPECIFICATIONS
The SATO LM 408e and 412e are dual-use (Thermal Transfer and Direct Thermal) high
performance labeling solutions designed for logistics and manufacturing sectors. Based
mechanically on the field-proven CL ‘enhance’ series, the LM408e and LM412e promise
reliable operation and consistent performance at a reasonable cost.
Key features of the two models in the LM Basic series are:
• Low cost 4-inch printer for Logistics and Warehousing
• Backlit two-line 16-character alphanumeric LCD panel
• Clear printing at a fixed resolution of 203dpi/305dpi
• Support for a wide range of I/O interfaces
• Supports SATO Barcode Programming Language for enhanced customizability
• Field-proven label and ribbon path from the acclaimed CL ‘enhance’ series
The two models support all popular barcodes, including 2-D codes. Seven human-read-
able fonts and two fast and efficient vector fonts, are resident in memory, providing liter-
ally thousands of combinations of type styles and sizes.
Key Feature LM408e and LM412e
Print resolution 203dpi/305dpi
Print method Thermal Transfer and Direct Thermal
Label sizes supported
(using default internal
memory)
LM408e: 4 inches (W) by 7 inches
LM412e: 4 inches (W) by 7 inches
Label sizes supported LM408e: 4 inches (W) by 49.2 inches at 203 dpi
LM412e: 4 inches (W) by 32.7 inches at 305 dpi
Interfaces available One of the following interfaces installable upon purchase:
High speed RS-232C (25-pin), LAN, USB, IEEE 1284/parallel
To Next Page
Loading...
Need help?
General
