EasyManuals Logo

SATO CLLM Basic 412e User Manual

SATO CLLM Basic 412e
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Section 3: Configuration and Operation
Page 3-16 LM Basic 408e/412e Operator’s Manual
3.8 MOVE MODE
3.8.1 Movements of Labels
In this mode, pressing the LINE button returns you to the main
Advance Mode screen. Otherwise, press FEED to proceed to
adjust the behavior of the built-in counters.
In the following screens of Move Mode, you can control the following label motion options:
Continuous or Tear Off, Pitch Sensor ON/OFF.
3.8.2 Move Mode
In this screen you can select between Continuous feeding of labels
(where labels are not detached from each other), or Tear Off
operation (where each label must be torn off before printing
resumes). The default is CONT.
Use the LINE button to select either CONT or TEAR. If CONT is selected, the next screen (Pitch
Sensor ON/OFF) appears. Otherwise, the printer returns to the main Move Mode menu. After
selecting the Move Mode, press the FEED button to confirm the setting and proceed to the next
screen.
3.8.3 Pitch Sensor
This screen lets you enable or disable the pitch sensor.
Use the LINE button to select either ON or OFF. The default setting
is ON. Then press the FEED button to return to the main Advance
Mode screen.
.
MOVE MODE
MOVE MODE
CONT TEAR
PITCH SENSOR
ON OFF

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO CLLM Basic 412e and is the answer not in the manual?

SATO CLLM Basic 412e Specifications

General IconGeneral
BrandSATO
ModelCLLM Basic 412e
CategoryLabel Maker
LanguageEnglish

Related product manuals